There are many advantages to setting up an AAC encoder. For one, it has the best sound quality at a lower bitrate, so it’ll save on streaming costs. It’s also supported by Flash, Microsoft Silverlight, and a wide range of mobile devices, giving your listeners different options for tuning in.
Before you start, you must retrieve server details from your encoder host.
To set up your AAC encoder, open SAM Cast and follow these steps:
- Click on the “Encoders” button at the bottom left corner.
- In the “Encoders” window, click the plus sign (“+”) to add a new encoder.
- Select “aacPlusV2.”
- Click “OK.”
The aacPlusV2 encoder window will then appear.
In the “Converter” tab:
- Under “Output format settings,” select your bitrate using the drop-down menu under “Format.”
- Selecting an AAC bitrate with “Parametric stereo” provides the best low bitrate/sound quality ratio.
- Make sure your bandwidth can support your streaming bitrate. The combined bitrate of all your streams should never exceed 80% of the value of the upload speed reported by speedtest.net.
- Under “General options,” check “Auto start encoder after” if you want the encoder to start automatically each time you launch SAM Cast. If you check this option, make sure to specify how many seconds you want to elapse before the encoder starts.
- Under “General options,” leave “Auto reconnect encoder after” checked so SAM Cast can recover from network errors.
In the “Server Details” tab:
- Select the server you want to send your AAC file stream to. You have the choice between SHOUTcast (versions 1 and 2), IceCast, or no server.
- We recommend selecting the “SHOUTcast” server to reach a broader audience.
- If you select “No server,” the encoder will archive your audio content without streaming it.
- Fill in your server and radio station details.
- If you select SHOUTcast 2, you will have to provide a valid SID.
In the “Stream Archive” tab:
- Check “Save stream to file” if you want to save a copy of your stream to your local hard drive.
Once you’ve configured all your settings, click “OK” to close the aacPlusV2 encoder window. Now click on “Start” to start the encoder. If everything is configured correctly, the report will show that SAM Cast is actively encoding and streaming.
Comments